Standard + Fine teeth
Choose two main wheels for steel/bi-metal oscillating blades with different tooth sizes.
For carbide oscillating blades, use the included diamond side wheel to sharpen one tooth at a time.
Home
/JobSaver Pro X2
JobSaver™ Pro X2 · Dual-station sharpener
Stop replacing dull saw blades.
Get more work from your oscillating blades, reciprocating blades, hole saws, circular saw blades and drill bits.
X2 + two sharpening stations + all seven side wheels.
Tap to enlarge +
Steel/Bi-Metal — Standard + Fine Teeth
✓ Built in Michigan
✓ Uses your tool battery
✓ Patent pending
“I sharpened several dozen blades the day I received the Pro X2 and was quite pleased how well it worked.”
✓ Verified buyer · October 12, 2026
Keep the blade. Get back to work.
Your savings don’t stop
at oscillating blades.
Put more of the blades you already own back to work—from everyday reciprocating blades to the hole saw you hate replacing.
*Use the correct wheel and method for the blade material. Blade condition and remaining tooth material affect suitability. Circular saw blades and drill bits require practice.
Why choose the X2?
Switch sharpening jobs.
Change fewer wheels.
Each station holds a main oscillating-blade wheel and a side wheel. Keep your most-used combinations mounted so you spend less time changing your setup.
- Two main wheels for oscillating blades Keep two tooth sizes ready, or move between steel/bi-metal and carbide.
- Side-wheel access on both sides Keep two of your seven included side wheels mounted for other blade types.
- Swap a whole sharpening station The S-Series station system lets you change your setup. Additional stations are sold separately.
Choose for the oscillating blades you use
Two setups. The same complete side-wheel package.
Your selection affects the two main sharpening wheels. Both include side wheels for steel/bi-metal and carbide applications.
Standard + Carbide teeth
Keep a standard steel/bi-metal main wheel and a diamond carbide main wheel on the same machine.
A practical choice when carbide oscillating blades are a regular part of your work. Brand-specific carbide stations are available separately.
Included with either setup
One X2.
A complete sharpening package.
- JobSaver Pro X2 dual-station power base
- Two sharpening stations with your selected main wheels
- All seven side grinding wheels
- Your selected cordless-tool battery adapter
- Access to step-by-step sharpening videos
Use your own compatible cordless tool battery. Battery and blades shown in demonstrations are not included.
Seven side wheels, included.
These are in addition to the two main wheels.
2
60° side wheels
One CBN for steel/bi-metal + one diamond for carbide
3
Ultra-thin diamond wheels
For suitable carbide sharpening applications
2
Thin side wheels
One CBN for steel/bi-metal + one diamond for carbide
See the method before you buy
Pick your blade. Watch it work.
See how to present the blade to the wheel and follow the sharpening technique.
Hole saws
Work around the teeth with the side-wheel system to sharpen a suitable dull hole saw.
Some videos show earlier JobSaver models using the same sharpening methods. Product photos and package details on this page show the X2.
Choose your X2 ↑Designed, tested & assembled in Michigan
Made for use.
Built to be serviceable.
We make many components in our Michigan shop, combining engineered plastics, stainless steel and sourced parts in a machine we can support and repair.
Purpose-built components.
Commercial 3D printers let us produce the shaped housings and sharpening-station components in small batches. Stainless steel forms the base surfaces and station table covers.
The direct-drive motor powers the wheels without a belt. Vacuum connection points are provided at the sharpening stations.
The X2 is assembled from a combination of in-house, sourced and imported parts.
Engineered plastics
Commercially printed parts shaped around the motor, wheel assemblies and sharpening stations.
Stainless steel surfaces
Metal base surfaces and table covers where you position your work.
Replaceable components
Serviceable parts and support from the people who build the machine.
Need help with a setup or a repair?
Contact our Michigan shop for help choosing the right components and getting back to sharpening.
Use your own blade costs
What could sharpening save you?
Enter the blades you normally replace each month, then estimate what share you could keep using through sharpening.
| Blade type | Replaced / month | Cost each (USD) |
|---|---|---|
| Oscillating blades | ||
| Reciprocating blades | ||
| Hole saws | ||
| Circular saw blades | ||
| Drill bits |
Choose an estimate that reflects your blade condition and sharpening results.
Estimated monthly replacement cost avoided
—
Illustrative machine-price payback —
Enter your blade quantities and costs to see an estimate.
Illustrative machine-price payback —
Based on the selected X2 price. This is an illustration, not a savings guarantee.
Calculation: monthly replacement spending × the share you estimate you can avoid. Excludes tax, shipping, sharpening time, power and wheel wear. Some blades cannot be restored; each blade has a finite amount of usable cutting material.
Does either setup sharpen carbide?
Both include diamond side wheels for carbide applications. With Standard + Fine, sharpen carbide oscillating teeth individually using the diamond side wheel. Standard + Carbide adds a dedicated diamond main wheel for carbide oscillating blades.
Do I need to buy the side-wheel pack separately?
No. Both X2 configurations on this page include all seven side grinding wheels, in addition to the two main wheels.
What do I need to power it?
Choose the adapter that matches your compatible cordless-tool battery brand and voltage. The adapter is included; the battery is not included. Contact us if you are unsure about your battery.
When will it ship?
Made in batches · Approximately 4-week build time. Built and assembled in Michigan. Carrier transit time follows the build period. Shipping details.
When does the 30-day return period start?
It starts when you receive the product. Contact us within 30 days of delivery to request a return. Items must be in good working condition without signs of abuse; return authorization is required. You pay return shipping, and original shipping or expedited costs are not refunded. Read the full terms.
How much practice does sharpening take?
Start with the step-by-step demonstrations. Oscillating blades, reciprocating blades and hole saws are generally more straightforward. Circular saw blades and drill bits require careful presentation and practice.
Can every dull blade be saved?
No. Damage and remaining tooth material determine whether a blade can be sharpened safely and usefully. Bi-metal blades have a finite high-speed-steel strip; carbide teeth need enough sound material remaining. This version is not designed for chisels or straight-edge sharpening.
Can I change stations or repair the machine?
The X2 uses swappable S-Series sharpening stations, and additional stations are sold separately. Replaceable components and repair support are available. Contact our shop for the correct part or advice; warranty coverage follows the current policy terms.
JobSaver™ Pro X2
You paid for the blade.
Put it back to work.
Two sharpening stations. Seven side wheels. Built in Michigan.
Choose your X2 — $379.00 ↑Made in batches · Approximately 4-week build time · Return window starts after delivery
From the JobSaver community
Customer reviews
Includes earlier JobSaver Pro reviews using the same sharpening methods and wheels.
$379.00
JobSaver Pro X2 · Seven side wheels included
Choose setup ↑
