JobSaver Pro Multi-Blade Sharpening System
Jobsite saw blade sharpener
Built in Michigan30-day guaranteeReal customer proof below

Stop leaving jobsites for blades — and stop buying so many replacements.

Read customer reviews

Sharpen on site when work stops. Resharpen later so blade costs stop stacking up.

Contractors buy JobSaver Pro for two reasons: they are tired of hardware-store runs when blades go dull, and they are tired of throwing away blades they already paid for.

  • Sharpen dull oscillating multi-tool blades fast.
  • Package options can cover hole saws, circular/miter saw blades, reciprocating saw blades, drill bits, and more.
  • Uses your cordless tool battery adapter. Battery and charger are not included.
Package comparison

Choose the package that matches the blades you want to sharpen.

The dropdown in the buy box is where you choose your package. This chart explains what each one is for before you order.

JobSaver Pro Basic package contents
Basic
Steel / bi-metal oscillating blades

Choose Basic if you mainly want to bring steel or bi-metal oscillating multi-tool blades back to life.

  • Main grinding wheel setup
  • Best entry package
  • For steel/bi-metal oscillating blades
JobSaver Pro Gold package contents
Gold
Oscillating blades + side-wheel touch-ups

Choose Gold if you want the Basic setup plus side wheels for faster touch-ups and more sharpening flexibility.

  • Everything in Basic
  • 60° CBN side wheel for steel/bi-metal
  • 60° diamond side wheel for carbide
JobSaver Pro Platinum package contents
Recommended
Platinum
Full saw blade sharpening setup

Choose Platinum if you want the broadest saw blade sharpening setup for oscillating blades, hole saws, circular/miter saw blades, reciprocating saw blades, drill bits, and more.

  • Everything in Gold
  • Best for contractors
  • Broadest saw blade-sharpening capability
Stay on the jobNo more wasted trips for replacement blades.
Sharpen on demandBring dull blades back before work stops.
Build backupsRe-sharpen dull stock during downtime.
Zero risk30-day money-back guarantee.

See exactly how it sharpens each blade type.

This section answers the question a buyer will naturally have: “I understand oscillating blades, but how does it sharpen the rest?”

Most common demoOscillating multi-tool blades
Sharpening individual teeth on an oscillating multi-tool blade with JobSaver Pro

Create a new row of razor-sharp teeth on the blade. Once the new profile is on there, sharpening should only take a few seconds each time.

1. Remove worn original teeth2. Create new row of teeth3. Go back to work cutting
Side wheel setupHole saws
Sharpening a hole saw with JobSaver Pro

Find the approximate angle of the teeth, then lightly grind the worn tooth edges so the hole saw cuts instead of burning, skating, and wasting time.

1. Find angle2. Lightly grind3. Cut cleaner
Platinum packageCircular / miter saw blades
Sharpening a circular or miter saw blade with JobSaver Pro

Touch up worn tooth edges so the blade cuts cleaner and lasts longer before you buy another one.

1. Index tooth2. Touch edge3. Rotate blade
Platinum packageReciprocating saw blades
Sharpening a reciprocating Sawzall blade with JobSaver Pro

Bring worn reciprocating teeth back to a working edge so the blade keeps biting instead of skating and slowing the job down.

1. Align teeth2. Touch up3. Keep cutting
Platinum packageDrill bits
Sharpening a drill bit with JobSaver Pro

Touch up worn drill bit cutting edges so the bit can bite again instead of slipping, smoking, or wasting time.

1. Set angle2. Touch edge3. Drill again

You already know both problems are coming.

Blades get dull. They start smoking, skating, cutting slow, or burning through material. Then somebody has to make a run to the hardware store for blades, open another expensive blade, or push through with a tool that is costing time and money.

JobSaver Pro Multi-Blade Sharpening System
The promiseKeep cutting instead of leaving the jobsite.
Why contractors buy it

Contractors buy JobSaver Pro for two reasons.

The first problem is lost jobsite time. The second problem is replacement-blade spending. JobSaver Pro is built to attack both.

⏱

1. They’re tired of leaving the jobsite for blades.

A dull blade should not turn into a hardware-store run. When the blade starts smoking, skating, burning, or cutting slow, sharpen on site and keep the job moving.

  • Skip the hardware-store run
  • Keep your crew cutting
  • Avoid downtime when a blade goes dull
  • Stay on schedule instead of stopping for replacements
💵

2. They’re tired of buying blades over and over.

Blade costs add up fast — especially premium blades. Resharpen oscillating blades, hole saws, circular/miter saw blades, reciprocating blades, drill bits, and more so you get more life from what you already paid for.

  • Resharpens steel, bi-metal, and carbide blades
  • Refresh oscillating blades, hole saws, circular/miter saw blades, reciprocating blades, drill bits, and more
  • Build a backup pile of sharpened blades before the next blade run
  • Start cutting replacement-blade spending now
Use it when you’re in a pinch. Use it when you’re rebuilding your blade stock. Either way, JobSaver Pro helps dull blades cost you less time on the job and less money in replacement blades.
Why order now?

The next dull blade is already on your schedule — and so is the next blade bill.

You may not know which job it will happen on, but you already know it will happen. A blade starts smoking, skating, burning, or cutting slow — and suddenly somebody has to stop working, open another expensive blade, or make a hardware-store run.

Be ready before the next blade slows the job down. Order JobSaver Pro now so it is already on your truck before the next dull blade costs you time, momentum, and replacement-blade money.
Industry proof

Reviewed by trade publications contractors already trust.

Reviewed by Fine Homebuilding

Fine Homebuilding called the sharpener a “portable and precise” battery-operated solution and noted that sharpening an old blade did not take much longer than installing a new one.

Read the Fine Homebuilding review

Reviewed by Wood Floor Business

Wood Floor Business described the sharpener as “quick and easy to use” and reported that cutting new teeth into a dull blade took about 10 seconds.

Read the Wood Floor Business review
The Fixer YouTube review thumbnail for Tiger’s Teeth blade sharpenerWatch reviewer video

The Fixer put it to work.

The sharpener took a blade that was basically garbage and “resharpened it in 10 seconds.” It also “quickly pays for itself” and is “the real deal.” — The Fixer

Watch the YouTube review
Real customer proof

Contractors are buying it because the problem is real.

Real customer feedback helps prove this is not just a clever idea. It is a tool people are using to get more life from saw blades.

KW
★★★★★

“This tool is no joke.”

I was skeptical at first, but after sharpening a pile of blades, the tool did what it said. This is the kind of proof a contractor needs before trusting a new tool.

Keith W. · 2 Guys & a Hammer
TT
★★★★★

“It sharpens wood blades great.”

A customer reported sharpening wood blades and cutting into old, very dry oak siding — exactly the kind of real blade-use proof contractors care about.

Verified customer · Tiger’s Teeth review
JB
★★★★★

“Impressive.”

One customer reported bringing a batch of blades back instead of throwing them away, which is exactly the jobsite-saving idea behind JobSaver Pro.

Juan B. · Verified customer

Built by a small Michigan team

Tiger’s Teeth product image

Every unit is built by a small crew in Michigan. That is also why the current build time matters: high demand means units are built in the order received.

  • Built by hand in Michigan.
  • Worldwide shipping available.
  • 30-day money-back guarantee.

Customer reviews

Read more customer feedback from verified Tiger’s Teeth buyers.

Frequently Asked Questions

Everything you need to know before you sharpen your first blade.

What version do I need?

The Platinum Everything Package is the most popular and sharpens the widest range of blades. The Gold package includes two different 60-degree side grinding wheels for steel, bi-metal, and carbide touch-ups. The Basic is for those who just wish to sharpen steel or bi-metal oscillating multi-tool blades.

How long do the grinding wheels last?

Electroplated grinding wheels last a long time as long as they are not abused. Out of the many hundreds sold, only one customer has worn one out. I’ve sharpened a ton of blades and haven’t worn one out yet, so I can’t give an exact number. My CNC grinder uses similar electroplated grinding wheels, and they last for years.

Will the diamond version sharpen both steel and carbide blades?

Because this is high-speed grinding, steel reacts with diamond, turning it into carbon dust and wearing it out quickly. Only use diamond abrasive on carbide and CBN abrasive on steel or bi-metal.

Where are these made?

I and my small team make all of them individually in Michigan. By the way, thanks for supporting small business guys like myself!

Is a battery included?

A battery adapter of your choice is included. No battery or battery charger is included.

Does international shipping include import fees?

Shipping prices do not include import or customs fees and taxes. Shipping carriers will handle charging any import taxes once the shipment arrives in the destination country.

JobSaver Pro Multi-Blade Sharpening System
Basic No Side Wheels / DeWalt 20v$225.00